Pages

Tampilkan postingan dengan label Amplifier. Tampilkan semua postingan
Tampilkan postingan dengan label Amplifier. Tampilkan semua postingan

The Transistor as an amplifier

ads Transistor sebagai penguat

The Transistor as an amplifier is one function of the amount of the transistor, apart from functions use the transistor as a switch too of course.  The current existence of a transistor in an electronic device is a must, for example, Tone Control, Amplifier (Amplifier end), the pre-amp and a series of others.

Signal input Transistor can make a great on the output current can be corroborated, could brupa DC and AC current prinsispnya to use in a transistor amplifier is as "a small current in the base used to control a larger current is given to the collector of the transistor is passing."

This means that when the base current is changed then the reinforcement of the case and the larger currents will flow from collector to emitter, this condition can be described as reinforcement using transistors.

Transistor sebagai penguat tegangan Transistor sebagai penguat

Not only can strengthen signals, can also be used as a transistor amplifier current, voltage amplifier or amplifier power. The following is an illustration of the transistor amplifier circuit as used in the amplifier is simple:

Transistor sebagai penguat Transistor sebagai penguat

Still remember the principle on the transistor as a switch? , where the condition of the transistor in saturation/arus base that flowed quite large so that the collector and the emitter relate gratitude as a cable connected, whereas at the moment conditions are cut off, the collector and the emitter could relate gratitude as a switch between the collector and the emitter has a very big obstacle, now in use as a transistor amplifier "not" be on the conditions of the two. Or it could be said that the base of the transistor is in the condition between the cut-off and saturation.

In addition to the transistor is able to work with optimum working point of the amplifier with transistor must also be determined, there are several types of amplifier, which is determined by the load line AC/DC:
Amplifier class A amplifier, at this point it works around type landscaped load line.
Class B amplifier has a point of work in areas cut off.
Amplifier class C under the areas cut off.
Amplifier class AB amplifier is a type which is a combination of class A and class B that work interchangeably with NPN and PNP transistor type.

For this type of amplifier types I will explain in more detail at a later time icon smile Transistor sebagai penguat , but the earlier we must understand in advance with work I described transistor as an amplifier of, may be usefulicon wink Transistor sebagai penguat

Related Words:

the transistor as an amplifier, amplifier circuit to make the simplest 200wat, transistor, CIRCUIT TRANSISTOR AMPLIFIER circuit using CURRENT, the transistor as an amplifier

Rangkaian Amplifier 200Watt dengan IC STK4050 dan Power Supply

amplifier 200watt STK4050 Rangkaian Amplifier 200Watt dengan IC STK4050 dan Power Supply


Banyak rangkaian amplifier 200watt yang terdapat di pasaran, bisa dalam bentuk OCl atau BTL. Sedangkan pada amplifier ini digunakan IC Hybrid STK4050.


Sedikit mengenai IC Hybrid, boleh dikatakan ini adalah komponen mikroelektronika yang disusun di atas substrat keramik alumina yang didalamnya terdapat beberapa transistor, kapasitor kecil dan resistor.


Proyek Rangkaian Amplifier ini menggunakan IC STK4050 yang diproduksi oleh SANYO, kelebihan IC ini adalah noise yang dihasilkan sedikit dan tentu saja dengan kualitas yang bagus.


Kapasitas maksimal dari IC ini sendiri yaitu sebesar 200 Watt. Cukup untuk membuat amplifier kelas menengah.


Pada Rangkaian Amplifier 200Watt ini sudah disediakan power supply yang memadai untuk mengoperasikan IC STK. Transfor mator yang digunakan adalah type CT (center tap) karena memang supplynya sendiri memerlukan (+) dan (-) serta GND. Karena kualitas yang dihasilkan sangat baik, amplifier ini cocok digunakan untuk home theater, speaker aktif atau komputer.


rangkaian amplifier 200watt Rangkaian Amplifier 200Watt dengan IC STK4050 dan Power Supply


IC yang digunakan bisa dengan no STK 4050 saja, atau dipasaran banyak juga terdapat STK 4050II atau STK 4050V, semuanya sama saja. Dengan IC STK ini desain dari PA 200 watt ini simple dan pemasangan heat sink di belakang bodi IC juga cukup mudah.


Berdasarkan spesifikasi dari IC ampplifier ini, load output / speaker yang ideal digunakan adalah dengan impedansi 8Ohms serta input impedansi sebesar 55KOhms.


Satu lagi yang perlu diingat, walaupun disini disediakan power supply, namun untuk  perancangan Rangkaian Amplifier 200Watt ini disarankan menggunakan PCB yang berbeda antara amplifier dan power supply untuk meminimalisir noise / dengung yang mungkin terjadi.

tip jitu